We all know what a great difference car speakers can make in elevating your day. Jumping in the car in the morning and amping up the stereo on the way to work can be the perfect way to start your day.
However, after a few years, you might notice that your speakers are fuzzing or that the one channel isn’t playing anything at all.
This can be a real bummer. But if you have curiosity and patience, then you can install some car speakers yourself.
But how to install car speakers? What kind of wires do you need to connect? What safety measures do you need to take?
How easy is it to do? Well, if you want the answers to these questions and more, then sit back, relax and keep reading.
Car Speakers – What Are They?
Car speakers are simply the sound system that you use to either play your car radio or any built-in televisions that you have in your car.
There are plenty of different varieties of speakers, from traditional connections to Bluetooth and wifi connections.
The latter two will allow you to connect your phone to your car, so you can play your own playlists no matter where you are.
Speaks are usually placed in the left and right channels near the doors of your car. However, you can also get speakers that are placed on the floor and at the back of your car for that full surround sound experience.
Tips on How To Install Car Speakers
Any car audio enthusiast will tell you that changing your car speakers is one of the easiest ways to improve the sound quality of your stereo. Not only do new speakers provide better sound quality, but they can also be more durable and resistant to damage. However, changing your car speakers can be a bit daunting if you’ve never done it before. Fortunately, changing your car speakers is a relatively simple process that anyone can do with a few tools and a little bit of patience.
The first step is to remove the old speakers from your car. This can be done by carefully prying them out with a screwdriver or by using a speaker removal tool. Once the old speakers are out, you’ll need to connect the new ones in their place. In most cases, this simply involves screwing the new speakers into place. However, some cars may require you to splice into the car’s wiring in order to connect the new speakers.
Regardless of how you wire them up, once the new speakers are in place all you need to do is test them out and enjoy your improved sound quality. With just a little bit of effort, changing your car speakers is a great way to upgrade your stereo without spending a lot of money.
How To Stay Safe When Changing Your Speakers
First off, you’ll need to disconnect the battery from your car. This is to make sure that you don’t get an electrical surge when you are installing your speakers. This can cause electrical faults and you want to avoid it at all costs.
You’ll also need to make sure that you are keeping the trim around your speakers intact. Not only will this leave your car interior looking very unsightly, but it will also lead to safety issues such as exposed wires.
The Tools You’ll Need To Install Your Car Speakers
Depending on what speakers you’ll need, you’ll need only a few basic tools, although, for more complicated setups, you’ll probably need more or less all of the following:
- Screwdrivers – you’ll need a variety of these, from flat-heads to Philips.
- Allen wrench
- Electrical tape
- Box cutter or small knife
- Soldering iron
- Socket wrench set
- Wire cutter and stripper
- Crimping tool
- Drill with screwdriver attachment
These are the tools that you’ll require for most types of speaker setup. You’ll also need a few interior parts:
- Car speakers
- A length of electrical wire
You’ll need to make sure that you have a flat workspace and that you are safely removed from any children or pets.
How To Install A Car Speaker
When you are installing your specific car speaker, you’ll need to make sure that you have read the manufacturer’s manual. This is because every speaker is different and even the most general guides might miss the particulars.
Here is a step-by-step guide on installing your car speakers:
- Disconnect the battery terminals on your car
- Remove the supporting panels and other areas where the speakers are mounted.
- Take the old speakers out and put it to one side. Keep all screws and fixings in a safe place.
- Remove existing speaker wires, they will simply clip onto the speaker terminals.
- Connect wires from new speakers so they are matched up with your previous wiring make sure the wires are replaced according to the same color codes as the old ones.
- Screw the new speakers back in place onto the mounting panels
- Before replacing the panels to the doors or dash, reconnect the car battery and test to see if all is working as it should
Should You Hire A Mechanic For Your Speakers?
We would recommend only hiring a mechanic to install your speakers if you are planning on removing the dashboard too. This can be a complicated process and you might have trouble taking off the entire front of your car.
A mechanic will also have all the right tools and the space to install your speakers correctly. However, one of the drawbacks of hiring a mechanic is that it will cost you significantly more money than if you are installing it yourself.
Other Tips For Car Speaker installation
Make sure that you test your speakers before attempting installation. There’s nothing worse than trying to install a pair of speakers, having them malfunction, and having to remove them all over again.
Installing SubWoofers
Installing subwoofers will be a lot different than installing the side speakers on your car. You’ll need to check the manual for installing your subwoofer. You’ll also need to check to see if your car has the room to house your speakers.
If you want the bass to be the dominant factor in your car speaker system, then we would definitely recommend that you install a subwoofer.
If you’re looking to add some extra thump to your car’s audio system, then you might want to install a subwoofer. While the process may seem daunting, it’s actually relatively straightforward. Here’s what you need to do:
- Start by disconnecting the negative terminal of your car’s battery. This will prevent any accidental electrical shorts during the installation process.
- Next, remove the rear seat and carpeting from your vehicle. This will give you access to the area where you’ll be mounting the subwoofer.
- Once you have access to the desired location, use a drill to create pilot holes for the subwoofer’s mounting screws. Be sure to use a bit that is slightly smaller than the screws themselves so that they can thread into the holes easily.
- With the pilot holes in place, screw the subwoofer into place using the provided hardware. Be sure not to overtighten the screws, as this could damage the subwoofer or its housing.
- Finally, reconnect the negative terminal of your car’s battery and test out the new subwoofer! If everything is working properly, you should now be able to enjoy some extra
Conclusion
We hope that we have given you the basics for decent car speaker installation and have helped you to approach it with a clearer understanding of the tools you’ll need.